Monessen Hearth DFS42PVC Instructions d'exploitation télécharger pdf (Page 21)

71D0532 21

LOG PLACEMENT

Figure 19 - Installing Rear Log (#1)

Before you begin — This unit is supplied with six (6) ceramic fiber logs. Do not handle these logs with your bare hands.

Always wear gloves to prevent skin irritation from ceramic fibers. After handling the logs, wash your hands gently with

soap and water to remove any traces of fibers.

INSTALLING CHARRED TIMBER LOGS ON

BURNER

WARNING

The positioning of the logs is critical to the safe and clean operation of this heater. Sooting

and other problems may result if the logs are not properly and ﬁ rmly positioned in the

appliance. Never add additional logs or embellishments such as pine cones, vermiculite or

rock wool to the heater. Only use the logs and EB-RW (rock wool) supplied with the unit.

Failure to position the parts in accordance with diagrams below or to use only parts

speciﬁ cally approved for this heater may result in property damage or personal injury.

Figure 20 - Installing Right Base

Log (#2)

Pins

Rear Log (#1)

1. Place rear log (#1) on two

located pins on the back of

the grate. See Figure 19.

2. Place right base log (#2) on two

pins on right side of grate.

See Figure 20.

Pins

Right Base Log (#2)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Pas de commentaire

Monessen Hearth DFS42PVC Instructions d'exploitation Page 21